Installation


Overview

This section will give installation instructions for PC and Mac users as well as a new cloud based solution for LaTeX typesetting.

Why we need installation

LaTeX can be run from the command line with a text editor and properly installed programs, however, I recommend using a LaTeX environment. This will simplify matters and also provide a development environment with useful properties such as syntax highlighting, compiling macros, etc.

PC - MikTeX

  1. Go to MikTeX.org
  2. Download recommended installer.
  3. Install downloaded package.
  4. Ready to LaTeX!




MikTeX

Mac - MacTeX and TeXShop

  1. Go to http://www.tug.org/mactex/index.html
  2. On the frontpage is the download link for the latest package. Install this package in the normal manner.
  3. Go to http://pages.uoregon.edu/koch/texshop/
  4. Go to the obtaining section,download, and install
  5. Make sure that the Path setting under the "Engine" tab in TeXShop preferences is set to "usr/textbin," this should be done automatically. There is also a chance that your particular configuration requires a different configuration, however, this is system specific and cannot be covered here.
  6. Ready to LaTeX!
MacTeX

TeXShop

Cloud - ShareLaTeX

  1. Go to sharelatex.com
  2. Make an account
  3. Ready to LaTeX!
ShareLaTeX

Tp.sk518d.pb802 Software Update: !new!

Access the Service Menu ( Menu + 1147 ), look for , and toggle the Mirror Mode option. Distorted / Solarized Colors

The is a popular Android-based 3-in-1 smart TV motherboard used extensively in 32-inch to 43-inch LED TVs. Updating its software is the primary solution for common issues like the TV being stuck on the logo , random restarts, or app compatibility problems . Quick Technical Specifications

Supports both HD (1366x768) and Full HD (1920x1080). tp.sk518d.pb802 software update

the .bin firmware file directly to the root directory of your FAT32-formatted USB drive (do not put it inside a folder). Disconnect the TV from the power outlet. Insert the USB drive into the USB 2.0 port on the TV.

Before flashing any files, you must verify that your TV matching parameters align with the board specifications. Installing incompatible firmware can permanently brick your hardware. Three-in-one Smart Android Mainboard Processor (CPU): ARM Cortex-A53 Quad-Core Graphics (GPU): Mali-450 Dual-Core RAM Capacity: 1GB DDR3 Storage (ROM): 8GB eMMC Flash Memory Access the Service Menu ( Menu + 1147

| Issue | Likely Cause | Solution | | :--- | :--- | :--- | | | Wrong file name or incorrect USB port. | Rename the file exactly as required; use a different USB port. | | Update freezes at 0% | Incompatible firmware (wrong panel type). | Immediately unplug power. Find the correct firmware. | | Black screen after update | Firmware mismatch or corruption. | You may need a serial TTL programmer (e.g., CH341A) to flash the SPI flash chip directly. This is an advanced repair. | | Remote no longer works | Firmware has a different IR code set. | Use the side buttons to re-enter the service menu and adjust the IR option. |

The USB drive format is incorrect, or the bootloader does not recognize the file name. Insert the USB drive into the USB 2

This is the simplest and most common method.