Turn off your Satlink WS-6906 completely. Plug the 3.5mm jack into the serial port of the Satlink unit. Connect the other end (RS232) to your PC or USB adapter. Do not turn the Satlink device on yet. 3. Configure the Upgrade Tool
Attempting to flash firmware meant for a different model (like the WS-6933 or WS-6916).
Obtain the latest firmware from a reputable source (check the manufacturer's website or dedicated satellite forums). Download the . satlink ws-6906 software upgrade
Have you successfully upgraded your WS-6906? Do you have a rare firmware version to share? Join the discussion in the satellite forums below.
Connect the data interface cable to the data port on your satellite finder. Turn off your Satlink WS-6906 completely
If you only need to update the list of satellites and transponders rather than the core firmware: "Write Parameters" button in SatlinkTools.
: Most commonly used by connecting the finder to a PC via an RS-232 cable and running the SatlinkTools program USB Flash Drive : Newer models may allow for updates directly via the by loading a Do not turn the Satlink device on yet
: The latest .bin firmware file and the SatlinkTools (or similar updater) application.
You must perform a recovery flash using a native RS232 motherboard port or a high-quality FTDI adapter, re-running the upgrade tool from Step 3. Crucial Post-Upgrade Tips
Even with careful steps, issues occur. Here is how to solve the most common failures.