Connect the wires to the corresponding pin headers on your Easy JTAG box. Connect the DC power supply to the battery connector pads on the motherboard (positive and negative).
To ensure the KG lock does not accidentally trigger again via Google Play services or automatic updates, apply these setup steps on the first boot:
connect to Wi-Fi immediately during the initial setup to prevent the KG client from re-syncing with the server. Use an ADB tool to Disable System Updates packages immediately after reaching the home screen. samsung kg lock remove easy jtag
Apply heat safely to desolder the EMMC/UFS chip from the PCB.
Thin jumper wires (0.02mm), flux, and a microscope for ISP connections. Connect the wires to the corresponding pin headers
Do the same for the partition if it exists on your model.
box, you typically need to work directly with the device's storage (eMMC or UFS) via ISP pinouts or by removing the chip. This process involves modifying or clearing partitions where the lock status is stored. Prerequisites Easy JTAG Plus Box with appropriate adapters (eMMC/UFS) ISP Pinouts Use an ADB tool to Disable System Updates
: This method requires specialized hardware like the Easy JTAG Plus Box and technical knowledge of partition structures.
Click or "Initialize" . The software should detect the memory size and partition information. 3. Reading/Modifying Partitions Navigate to the "Partitions" tab.
Using easy JTAG for Samsung KG lock removal offers several benefits: