Resetter Epson L3150 Updated

Troubleshoot (e.g., blinking red lights).

If you'd like to safely complete this process or troubleshoot further, tell me:

| | Cons | |----------------------------------------|-----------------------------------------------| | Saves $50–$100 service fee | Voids your warranty | | Printer works for another 1–2 years | Ink pad may eventually overflow (physical leak) | | Quick (5–10 minutes) | Potential malware risk from shady downloads | | No special hardware needed | Not guaranteed to work after every firmware update |

The resetter works by connecting to the printer via USB and directly accessing the printer's NVRAM to reset the waste ink counter value. Unlike many other printer models, the Epson L3150 does not have a user‑replaceable maintenance box with a chip; it uses an NVRAM flag stored on the motherboard, making the resetter a critical tool for resolving service‑required lockouts. resetter epson l3150 updated

A new list will appear. Scroll down to the Maintenance section and select . Click OK . Step 4: Check and Initialize Look for the Main pad counter checkbox and check it.

, which provides a "Trial" mode to reset the counter by 20% for free or 100% with a paid key. EEPROM Read/Write

Temporarily disable your real-time antivirus protection or Windows Security. Troubleshoot (e

Check the boxes again, and this time, click the button.

If software methods fail, buy a or a Resetter Dongle (USB stick) for the L3150. These are not blocked by firmware.

The red blinking lights should now be gone, and the power light will remain a solid green. Your printer is successfully unlocked. Essential Post-Reset Maintenance A new list will appear

Open the extracted folder, right-click on AdjProg.exe , and select Run as administrator .

Using a resetter only resets the digital counter; it does physically clean the ink pads. If your printer has had a lot of use, you should eventually remove and clean or replace the physical ink pads to prevent ink from spilling inside the printer.

The WIC Reset Utility is a commercial tool specifically designed for waste ink counter resets. It is widely regarded as reliable. The trial version allows you to check the counter percentage in NVRAM so you can confirm that the waste ink counter is indeed the issue before paying for a full license.