The PSA XS Evolution is a professional diagnostic scanner designed for the PSA Group, which includes Peugeot, Citroën, DS, and later Opel and Vauxhall models (2017 onwards). It is essentially a clone of the original equipment used by dealerships, but it is sold at a fraction of the price. The device allows you to perform near-dealer-level functions such as:
: The genuine unit includes a K-Line multiplexor and supports CAN-BUS and SAE J1850 (PWM and VPW) protocols. Driver & Software Requirements
every time. This bypasses permission issues that can prevent the software from accessing the driver. psa xs evolution 9780z5 driver
Without this specific driver, the operating system may recognize the device as an "Unknown USB Device" or assign a generic Microsoft driver, which leads to:
Built with high-quality optocouplers and the original Fujitsu AN2131QC microcontroller. They accept firmware updates seamlessly. The PSA XS Evolution is a professional diagnostic
| Error Message | Likely Cause | Solution | |----------------|---------------|-----------| | “This driver is not signed” | Windows Driver Signature Enforcement | Disable enforcement (see Part 4) or boot into Test Mode. | | “Device cannot start (Code 10)” | IRQ conflict or power failure | Unplug, reboot, use different USB port. Update chipset drivers. | | “Driver not intended for this platform” | 32/64-bit mismatch | Download the correct architecture. The 9780z5 v2.1.8 has separate x86 and x64 MSIs. | | “PSA 9780z5 not found” after installation | Device firmware corrupted | Reflash firmware (see Part 7). Or check cable – use a shielded USB cable. | | Blue screen: PSA_eVolution.sys | Memory leak in driver v2.0.x | Update to v2.1.8 or later. Roll back to v1.9.6 if system is legacy. |
With the correct driver installed and the interface properly recognized, the PSA XS Evolution 9780Z5 gives you the power to diagnose, repair, and customize your PSA vehicle just like a professional dealer—without ever leaving your driveway. Driver & Software Requirements every time
This is a niche industrial/embedded component (likely a stepper motor driver or I/O module for a PSA (Production Systems Automation) or XS Evolution series system). Public documentation is not widely available, so this guide is compiled from standard industrial automation practices and common part-number logic.