The Receiver button will light up and flash twice, confirming that all custom-programmed manufacturer codes have been deleted and the remote is restored to its original factory settings.
The Onkyo RC-799M is a versatile factory-original remote control designed for Onkyo AV receivers. It commonly ships with popular home theater systems like the HT-R391, HT-R591, and HT-S5500.
The Onkyo RC-799M is a factory-standard audio/video (AV) receiver remote control. It originally ships with home theater systems like the Onkyo HT-R391, HT-R591, and the HT-S3500 package.
The specific layout might vary slightly between different third-party manufacturers, but the core functions remain the same. onkyo rc-799m remote manual
Remove the batteries. Press every button on the remote twice to drain residual capacitance. Insert fresh batteries. 3. Lost Codes After Battery Changes
You can program the RC-799M to control your TV, DVD player, or streaming box. This eliminates the need for multiple remotes on your coffee table. Remote Component Buttons
Hold both buttons for 3 seconds until the indicator light glows. The Receiver button will light up and flash
Insert two AA batteries matching the positive (+) and negative (-) polarity marks inside the compartment. Snap the battery cover securely back into place.
Prominent master volume rocker and a dedicated muting button.
You can program the RC-799M to control secondary components like your television, Blu-ray player, cable box, or media streamer. Follow these steps to input a manufacturer programming code. Step-by-Step Programming Guide The Onkyo RC-799M is a factory-standard audio/video (AV)
For receivers like the TX-NR515 that support multi-room audio (Zone 2), the RC-799M can control playback in a secondary room:
Cycles through surround sound modes like Dolby Digital, DTS, and Stereo.
Press the RECEIVER button first. If you previously pressed TV or BD/DVD, the remote is sending commands to those devices instead of the Onkyo receiver.