Numark Mixtrack Pro 2 Rekordbox Mapping Guide

Installed and updated (Performance Mode required). USB Cable: To connect the controller to your computer.

Now for the primary reason you're here: assigning each knob, fader, and button on your Mixtrack Pro 2 to a function in rekordbox. This process is done entirely within rekordbox's MIDI Mapping Editor.

Mapping "Shift" combinations can be difficult without external MIDI translation software. 💡 Better Alternatives

is a legacy controller, it is perfectly capable of driving Rekordbox for a modern DJ set. The process requires a solid afternoon of manual MIDI mapping [3], but the result is a functional, tailored setup that bridges the gap between old hardware and new software. numark mixtrack pro 2 rekordbox mapping

While the Numark Mixtrack Pro 2 is not natively supported by rekordbox, creating a custom MIDI mapping is a practical way to bridge the gap between your existing hardware and the software you want to use. The process, while manual, gives you a fully functional DJ setup.

| Pad Mode | Pad 1 | Pad 2 | Pad 3 | Pad 4 | |----------|-------|-------|-------|-------| | Hot Cue | Hot Cue 1 | Hot Cue 2 | Hot Cue 3 | Hot Cue 4 | | Loop | Active Loop | Set Loop In | Set Loop Out | Loop 1/2x | | Sample | Sampler Slot 1 | Sampler Slot 2 | Sampler Slot 3 | Sampler Slot 4 | | FX | FX1 On | FX1 Select | FX2 On | FX2 Select |

Connect your RCA Master outputs to speakers and your headphones to the front panel 0.5.4. Installed and updated (Performance Mode required)

to Rekordbox is entirely possible, allowing you to use this reliable hardware within Pioneer’s ecosystem. This guide covers everything from the initial setup to creating your own custom MIDI mapping. 1. Why Map the Mixtrack Pro II to Rekordbox? Mixtrack Pro II

On the right side of the rekordbox screen, next to the master output level meter, you'll see a . Click it to open the MIDI mapping window. The MIDI button will be highlighted when a MIDI mapping compatible device is connected.

A common issue is the crossfader and tempo faders behaving in reverse (e.g., moving the fader up decreases BPM in the software). This process is done entirely within rekordbox's MIDI

Even though rekordbox won't recognize the controller natively, your computer must see it as a MIDI device.

One major hurdle is that Rekordbox often restricts the "jog function" (the touch-sensitive platter movement) for non-Pioneer controllers. While buttons and faders map easily, getting the platters to scratch like they do in Serato requires advanced workarounds. How to Map the Mixtrack Pro 2 in Rekordbox