Install !!install!! - Lte Hmonitor

You must have root-level access to the device.

After installation, the software needs to be configured to recognize your hardware’s LTE modem interface. 1. Accessing the Configuration File

Before beginning the installation, ensure you have the following requirements met to avoid errors:

Before installing LTE HMonitor, ensure that your system meets the following requirements: lte hmonitor install

Post-installation, power users bypass the GUI entirely and edit config.ini located in the installation root.

: Create a root-level folder named exactly hme .

The software runs on , Linux (including Raspberry Pi and Synology NAS with Mono), and can even be launched directly on the router using a USB drive (embedded version). The free version does not save data when the program is closed. You must have root-level access to the device

Input your router’s local gateway IP. The default for most routers is 192.168.8.1 . Username: Enter your router admin username (usually admin ).

Open your web browser and navigate to the official LTE H-Monitor Download Page .

Plug in your modem to a USB port (avoid USB hubs). Open (Win + X → Device Manager). Look under "Ports (COM & LPT)". You should see something like: The free version does not save data when

If the installation fails due to missing packages, check the installation logs and install the required dependencies (e.g., libubox , kmod-usb-net ). Best Practices for Deployment

Do not run the application directly from inside the zipped folder, as it will fail to save your configuration settings. Right-click the downloaded .zip file.