Hicam H6 Mini Dv Operating Manual

For more information on the HiCam H6 Mini DV, please refer to the following resources:

From Standby Mode (Solid Blue), click the once.

The Hicam H6 Mini DV represents the perfect intersection of compact, versatile hardware and intelligent software, allowing you to watch over your space anytime, anywhere with just a few taps on your smartphone.

In some cases, you may be able to complete the Wi-Fi setup by scanning a QR code displayed in the app with the camera. hicam h6 mini dv operating manual

The camera will now only record when it detects movement. It stops after a period of no activity to save battery. Infrared (IR) Night Vision

A significant feature of the Hicam H6 is its compatibility with the ONVIF and RTSP standards. This allows you to use the camera with other powerful software like iSpy, Agent DVR, or Camlytics.

The battery is likely completely drained. Connect it to a 5V/1A wall charger for 3 hours. Avoid using fast chargers (like phone chargers above 2A), as they can damage the internal battery. The LED light flashes red/blue rapidly and shuts down. For more information on the HiCam H6 Mini

Manually toggle the IR LEDs on/off or set them to automatic mode for clear footage in complete darkness.

: Charge the device for at least 2–3 hours before first use. Inserting the MicroSD Card Locate the MicroSD slot.

Inside the app, click on the next to your camera. Select WiFi Config or Network Settings . The camera will now only record when it detects movement

: Used for data transfer and battery charging.

If you choose to use the camera as a standalone Digital Video (DV) recorder without Wi-Fi, use these physical button steps: Powering On Press and hold the for 2–3 seconds.

The HiCAM H6 cycles through three main modes: , Photo Mode , and Playback Mode . Press the Mode button (short press) to cycle.

Connect the camera to your computer using the USB cable (or use a card reader).

Blue (Wi-Fi/Recording) and Yellow (Network Status). 2. Initial Setup and Preparation