Access to the CLI is typically gained through a terminal emulator via Telnet, SSH, or a direct serial connection to the NPU unit. Default Password: Enable Privileged Mode: > enable Password: ericsson Use code with caution. Copied to clipboard Unlock Hidden Commands: (Use with caution for advanced debugging) # cliunlock Use code with caution. Copied to clipboard Essential CLI Commands Command Category Description System Info show board Displays serial, type, and software version of all boards show board 1/2 config
restore configuration tftp:// / .cfg Use code with caution.
This guide is accurate for MINI-LINK TN, CN, and PT series running EOAX or later software branches. Syntax may vary slightly between models; always check the specific product’s CLI Reference Manual. ericsson mini link cli commands
GET AL HIST
Displays current temperature of each board and alarm thresholds Management Performs a "warm restart" on the Traffic Node Sends operator confirmation for class 1 objects Activates an active release or load module Standard CLI copy command for log or config files Configuration Submodes The CLI is organized into specific classes. Use the command followed by the sub-layer to modify settings: Interface Configuration: For physical and logical port settings. Protocol Configuration: For managing routing or communication protocols. Router Configuration: For IP-related routing tasks. LAN-DCN Commands: Access to the CLI is typically gained through
: Always run a configuration export before updating software or changing routing/VLAN profiles.
show alarm (Crucial for identifying active faults). Copied to clipboard Essential CLI Commands Command Category
To start a fresh measurement period (often done before a test):
Some advanced CLI commands are hidden by default to prevent accidental misconfiguration. To view these, you must enter the cliunlock command in Privileged EXEC mode before using them.