The CM2 Dongle Manager is an official application developed by Infinity-Box, functioning as the "brain" for the physical CM2 dongle. The dongle is a hardware key that provides access to advanced tools for GSM (Global System for Mobile Communications) and CDMA (Code-Division Multiple Access) mobile phone servicing. Its main role is to manage the device's smart card, update its internal firmware, retrieve its unique serial number, and access its activation credentials.
The CM2 Dongle Manager 181 is not officially supported on Linux or macOS without a virtualization layer.
Follow the prompts until the device is listed under "Smart Card Readers" without errors. Step 4: Install and Run CM2 Dongle Manager 1.81 cm2 dongle manager 181 install
| Component | Requirement | |-----------|-------------| | | Windows 7 SP1, Windows 8.1, Windows 10 (20H2+), Windows 11 | | Architecture | 64-bit (recommended) / 32-bit compatible | | RAM | 4 GB minimum (8 GB recommended) | | USB Port | USB 2.0 or USB 3.0 (dedicated port preferred) | | Disk Space | 500 MB free | | .NET Framework | Version 4.7.2 or higher | | Admin Rights | Required for driver installation |
It simplifies the process of device management, making it quicker and more efficient to perform tasks such as unlocking, flashing, or transferring data.
By managing the interaction between the dongle and connected devices, the CM2 Dongle Manager 181 enhances the security and stability of device operations, reducing the risk of data loss or corruption. The CM2 Dongle Manager 181 is not officially
If it is not recognized, manually download and install the (MTK, SPD, etc.) from the Infinity Support Area . 4. Activation & Firmware Update
Reinstall PCSC drivers, try a different USB port (preferably USB 2.0), or clean the smart card chip. Firewall blockage or server maintenance.
Digital and Analog Wideband Communications Receiver with Dualwatch and Dual Band Recording Functions.
Covering 0.1–3304.999 MHz, the R30 portable receiver gives users the ability to decode multiple digital modes, as well as, traditional analog modes. The large LCD display makes operating the radio a breeze with a new intuitive user interface allowing you to see information from the dual receivers. With dual receive operation, you can simultaneously listen to two signals and record the activity to share the excitement with others. The supplied Li-Ion battery, BP-287, provides almost 8.5 hours of operating time.
The R30 can receive on different bands and different modes. For example, users can monitor HF and UHF signals simultaneously. The R30 also allows users to scan for other active channels on the B band while receiving the main signal on the A band.
Individually record the audio of the two bands received while in the Dualwatch mode onto a microSD card in the WAV format. Play back the recorded audio on the receiver or a PC. In addition, frequency, mode, S-meter reading, time, current position data and altitude can be saved with received audio.
Use a microSD card for data storage. Recording/playback of received audio, RX history log, radio set tings and GPS logger data can all be loaded onto the microSD card.
The R30 scans approximately 200 channels per second in the A band and 150 channels per second in the B band. Quickly find and lock in to a desired signal.
The integrated GPS receiver displays your current position data, course, speed and altitude on the display. Save the GPS data in recorded audio files. The R30 can list up to 50 stations approximately 100 miles from your current location, as long as the station’s position data is programmed in advance in the memory channels.
Remotely control the IC-R30 from your favorite iOS™ and Android™ device. Utilizing the built-in Bluetooth® feature, remotely control dual receivers, VFO operation, memory channels, a variety of scans, and various function settings. Combine that with Icom's multipoint connection VS-3 Bluetooth® headset, and you will never feel tethered to your receiver again. This combination allows you to listen to your favorite smart device apps as well as your R30, scanning your favorite channels.
- 2.3" large LCD with intuitive user interface
- Band scope function
- Speech function reads out operating frequency and mode
- 8-character channel names
- DTCS and CTCSS tone squelch
- RF gain control (10 steps)
- ATT function (3 steps)
- Key lock function
- Monitor function
- Power save function (3 steps)
- Clock
- IP57 protection
Below are some of the accessories that can be used with the Icom R30 20 model. Click the Accessory Catalog Button for complete and updated information (cost, availability, and more).
These files contain information about the available products from the manufacturer. If you need something that is not on our website, please contact us. We will help you purchase the desired product at a low price.
See how Icom leads the way in digital ham technology with the latest DSP and D-STAR radios
Icom America Inc. designs, engineers, and manufactures wireless radio communications equipment and products for marine, avionics, land mobile, and wide-band receiver industries. The company offers amateur radios, including base stations, mobile, handheld, D-Star, and receivers; avionics, including handheld mobile and panel mount; mobiles, including IDAS, P25, network/RoIP, and data/HF; and handheld devices for marinas, large yachts, and various commercial vessels. It also provides custom-build and off-the-shelf radio systems. The company serves federal, state, and local government agencies.
The Icom logo is a registered trademark of Icom Inc.
Wideband Communications Receiver, 100 kHz - 3.3 GHz, Digital and Analog Modes, 2000 Memory Channels, Large LCD, Band Scope, SMA Antenna Connector, PC Controllable, with GPS Receiver
