Caraflo V200 Shower Instructions [verified] -

Caraflo V200 is a thermostatic mixer shower valve specifically designed for leisure vehicles like static caravans, motorhomes, and holiday homes. It is an upgrade to the older V100 model, sharing the same 45mm pipe centres for a direct replacement without needing modification. The Caravan Warehouse Key Installation & Site Requirements For safe and optimal performance, the requires specific water conditions National Shower Spares Temperature Limits: Recommended maximum of 65 raised to the composed with power C , with a minimum hot water inlet of 55 raised to the composed with power C and a maximum cold inlet of 25 raised to the composed with power C Anti-Scald Protection: The mixed water temperature is typically preset between 35 raised to the composed with power C 40 raised to the composed with power C Fail-Safe Feature:

Periodically unscrew the handset and soak it in a mild white vinegar and water solution for an hour. Use a soft brush to clear the rubber nozzles. Winterizing (Crucial Step!)

Turn on the water pump and check all connections for leaks before sealing the wall panel. 3. Operation Instructions The Caraflo V200 operates as a conventional mixer. caraflo v200 shower instructions

If the water profile is too cold, rotate the spindle slightly . If it is too hot, rotate the spindle clockwise .

Align the shower valve inlets with the hot and cold supply pipes. Caraflo V200 is a thermostatic mixer shower valve

Clean the inlet filters. Caravans frequently suffer from sediment buildup from campsite water feeds. Disconnect the valve and flush the mesh filters positioned on the hot and cold inlets.

Proper preparation prevents leaks and ensures optimal water pressure. Follow these steps before mounting the valve: Use a soft brush to clear the rubber nozzles

Do not mix a gravity-fed hot supply with a mains-fed cold supply (or vice versa). National Shower Spares Operating & Maintenance Instructions Water Control:

Shut off the central caravan water supply and turn on all taps to drain remaining water from the internal lines.