Bst900w Manual [portable]

From the main screen, hold down the ▲ or ▼ button to enter the recall menu. Select the desired memory slot and press OK to load those specific parameters instantly. Advanced Settings: Special Modes (00, 01, 02)

While the output is running, press the or ▼ buttons to cycle through real-time telemetry data: Voltage (V) and Current (A) Power Output (W) Capacity (Ah) Runtime (Hours:Minutes) 4. Advanced Features and Memory Functions

Understanding the limits of your BST900W is critical to prevent overheating or permanently damaging the components. 8V to 60V Output Voltage Range: 10V to 120V Input Current Limit: 0A to 15A (Maximum) Output Current Range: 0A to 15A (Maximum) Maximum Output Power: 900W Conversion Efficiency: Up to 95% Voltage/Current Display Resolution: 0.01V / 0.01A Memory Storage: 10 data groups (M0 through M9)

Press OK to begin boosting. The "OUT" indicator light will illuminate. Navigating Display Modes bst900w manual

In setting mode, long-press SET for 10 seconds. Select a slot ( SA.-0 to SA.-9 ) and press OK .

0-F1 : Automatic Start Mode. The output energizes automatically upon power-up.

When power is supplied to the input terminals, the module boots up but keeps the output disabled by default. You must physically press the OK button to send power to the load. From the main screen, hold down the ▲

When you first power on the device, it displays the default view.

: Illuminates when the load draws enough current to hit your current limit, switching the module into a protective constant current mode. Button Functions

The module features 10 memory slots to store frequently used profiles. Navigating Display Modes In setting mode, long-press SET

While the output is active, you can cycle through the display to monitor performance: Output Voltage I: Output Current P: Power (Watts) Ah: Ampere-hours (useful for battery capacity testing) 4. Advanced Features (Special Functions)

Connect your input power source (ensure it is within the 8V-60V range).

Check input polarity and ensure the voltage is at least 8V.