Avery Berkel L126 Calibration [upd] Jun 2026

: Locate the SW1 button on the bottom of the scale. Press it using a small tool. The display will show "D I A G" .

: A scale that drifts over its true zero baseline or reports under-filled shipments ruins your inventory data, leading to raw material waste or customer dissatisfaction.

If successful, the indicator will briefly flash DONE , PASS , or display the exact weight value you placed on the scale. avery berkel l126 calibration

Always verify your work before putting the scale back into commercial or industrial production.

Turn the scale on and let it warm up for at least 15 to 30 minutes to stabilize the internal electronics. 3. Required Equipment Certified M1 or F1 class calibration weights. : Locate the SW1 button on the bottom of the scale

: It features large tactile keys that can be operated even with gloved hands.

(often on the bottom of the unit or behind a small panel). Press it using a small screwdriver or pen until the display shows Navigate to CAL : Press the button twice until the display changes to . Confirm this selection by pressing the (or Blue) button. Select Weight Units : A scale that drifts over its true

Target calibration value typed does not match physical weight used.

The display will show a default weight value (e.g., 15.00 for 15kg). If you are using a different test weight asset, use the arrow keys to modify the digits on the screen to match your exact certified weight.

If calibration fails, ensure the load cells are not obstructed and the platform moves freely.

Avery Berkel L126 Calibration Guide: A Step-by-Step Walkthrough